Just Mike
Just Mike
  • 482
  • 1 636 903
Curfew 1908 William Gilbert Mantel Clock Repair
This clock was very clean, so I only oiled the movement on Front and Back. Polished up the Bell with Mothers Mag & Aluminum Polish that cost $6.00 and compared the polish to the Simichrome Polish that really cost the money. I also painted the swirls, carved on the front of the clock.
A note from the NAWCC posting;
Just to let you know - this model is called a "curfew" clock. When a gentleman suitor took out a man's daughter on a date he was instructed to have the girl back home by the the time the bell on top rang at the top of the hour he was told to have her back home by. Thus, a curfew clock.
You can contact me at
email: justmike2575@gmail.com
Here I do most of my work on clocks. Mainly cuckoo clocks, yet I am always looking for the unusual and eye catching clocks. Some of the clocks I get into are ones that need saved from the dump. They fell off the wall from not securing the clock to the wall using the stud behind the sheetrock. Some of the clocks were laid to rest out in the garage or barn and I except the challenge of getting them back together again.
A well loved clock at one time is one that has a lot of wear and you find old bushings that might need to be replaced.
Переглядів: 275

Відео

Waterfall Clock Light Change to L E D
Переглядів 152День тому
My brother found this clock for me, but the light did not work. Inside of the clock, it had a tag for the type of Florescent Round bulb the clock needed. Searching on line, I could not find one because they stop making that type of bulb and if there was one out there, they were asking $65.00 plus shipping. So I decided to put in L.E.D. strip to light my clocks waterfall. Check it out and see wh...
FORESTVILLE Alarm Clock Repair
Переглядів 31414 днів тому
This clock I bought from GW and I didn't realize how bad the rust was on the clock. I got the alarm clock cheap enough and bought it Only because of the Brass color and thought it would be a nice show piece. Took some time to get the movement out, oiled the clock and shined up the exterior of the clock and looks good enough for who it's for. The clock is up and running again for some more years...
1915 Gilbert Wall Clock Finish up Loose Ends
Переглядів 200Місяць тому
I forgot some things in the first video. Lets finish up the Screens on the sides of the clock, Bolt the Handers on the back and make the Pendulum Stick You can contact me at email: justmike2575@gmail.com Here I do most of my work on clocks. Mainly cuckoo clocks, yet I am always looking for the unusual and eye catching clocks. Some of the clocks I get into are ones that need saved from the dump....
1915 W L Gilbert Clock Cleaning
Переглядів 307Місяць тому
This Gilbert clock I was lucky enough to get for pennies. A GW online auction, I forgot to bid and nobody bid on the clock as well. To my surprise, the clock came back on for bid and they changed the shipping to $9.99 and buy it now. SO I DID. The clock came from Florida and was shipped to Washington State. I only wanted the clock because I liked the hinges on the door. After getting into the c...
Part 2- Regula 25 Cuckoo Clock Repair and Timing
Переглядів 547Місяць тому
Here I finish the clock with getting the hammer and lift arms for the bellows adjusted. I also carved ears for my Deer head and refinished the topper to match the clock color. I figured out the weights needed to make the clock run right as well. I still have on order, a gong and will make the back door when it gets in. You can contact me at email: justmike2575@gmail.com Here I do most of my wor...
Part 1-Cuckoo Clock Regula 25 Movement with Dancers-Rabbit and PHEASANT
Переглядів 418Місяць тому
This wonderful clock was missing some good parts that would cost a lot of money. Lucky for me, I had the main parts already in my stock. Here, we had a winder that didn't wind very nice and I show how I fixed that as well. The topper didn't match that I had in my stock, so I used Denatured Alcohol to help remove the color, then re-stained the topper with a walnut stain to match. You can contact...
1926 LUX Table Clock Repair
Переглядів 439Місяць тому
This 1926 Lux Table clock was wound all the way and not ticking. After messing around with the clock, oiling the clock, I noticed that things were not right. In this video I show that I had to change the Hair Spring. I also wax the metal case with Howards wax and after a few hours, buffed the case with a towel and it looks so much better. You can contact me at email: justmike2575@gmail.com Here...
GK 1900 Rail Road Quail Quail Clock Stopped Cuckooing
Переглядів 2692 місяці тому
My Rail Road Quail Cuckoo Clock stopped cuckooing and I needed to find out why. Here, I will show what I found that was stopping the clock from cuckooing. You can contact me at email: justmike2575@gmail.com Here I do most of my work on clocks. Mainly cuckoo clocks, yet I am always looking for the unusual and eye catching clocks. Some of the clocks I get into are ones that need saved from the du...
Part 2 Herbert Herr Cuckoo Clock repair w/Bushing work
Переглядів 3612 місяці тому
To finish up this clock, I found I had one bushing to replace and one of the whistle boxes did not go with this clock and had to make some changes. Both Whistle Boxes had the same tune. You can contact me at email: justmike2575@gmail.com Here I do most of my work on clocks. Mainly cuckoo clocks, yet I am always looking for the unusual and eye catching clocks. Some of the clocks I get into are o...
RETAKE- Part 1 Herbert Herr Cuckoo Clock Repair
Переглядів 4762 місяці тому
If you came early to view the Video. I don't know what happen, but I had to re-do the Video. You can contact me at email: justmike2575@gmail.com Here I do most of my work on clocks. Mainly cuckoo clocks, yet I am always looking for the unusual and eye catching clocks. Some of the clocks I get into are ones that need saved from the dump. They fell off the wall from not securing the clock to the ...
Part 2 Nancey's Black Forest Cuckoo Clock Repair
Переглядів 3732 місяці тому
This clock was given to me from Nancey and all I had to do was pay shipping. The Cuckoo clock belong to her Grandfather that passed away and was too costly to have repaired. At one time, he tried to repair the clock himself after the cuckoo clock fell off the wall. My videos were not available at the time of his repairs, so the clock went through a lot and never did work again until I got a hol...
Part 1-Small Black Forest Cuckoo Clock Repair from Nancey
Переглядів 6963 місяці тому
This clock was given to me from Nancey and all I had to do was pay shipping. The Cuckoo clock belong to her Grandfather that passed away and was too costly to have repaired. At one time, he tried to repair the clock himself after the cuckoo clock fell off the wall. My videos were not available at the time of his repairs, so the clock went through a lot and never did work again until I got a hol...
PART 2 1915 SETH THOMAS ADAMANTINE MANTEL CLOCK Working on the Movement
Переглядів 5003 місяці тому
This was a very nice clock that needed extra deep cleaning, so I took the case apart and tried new things to get the white fog off the black paint or plastic of that time. The next video will show the movement getting broke down and a couple of bushings replaced. Check out these other channels that are UNIQUE in their own way. 1. Mark Munnerlyn www.youtube.com/@munnerlyn3 He has great info on m...
The Aurora Geomagnetic Storm in SW Washington
Переглядів 1153 місяці тому
My first time watching and didn't know what to expect. Amazing, but not as bright as you see in videos and Time laps cameras. The pictures are dark, but I thought it would be well worth watching. You can contact me at email: justmike2575@gmail.com Here I do most of my work on clocks. Mainly cuckoo clocks, yet I am always looking for the unusual and eye catching clocks. Some of the clocks I get ...
8" DIGITAL CLOCK with Day
Переглядів 1563 місяці тому
8" DIGITAL CLOCK with Day
Part 1 1915 SETH THOMAS ADAMANTINE MANTEL CLOCK RESTORATION
Переглядів 4423 місяці тому
Part 1 1915 SETH THOMAS ADAMANTINE MANTEL CLOCK RESTORATION
Part 2 KUNER The FARMER and WIFE Dancing Cuckoo Clock Repair
Переглядів 4283 місяці тому
Part 2 KUNER The FARMER and WIFE Dancing Cuckoo Clock Repair
Part 1 KUNEC The Farmer and Wife Dancing Cuckoo Clock Repair
Переглядів 4954 місяці тому
Part 1 KUNEC The Farmer and Wife Dancing Cuckoo Clock Repair
1986 8 Day Oompha Cuckoo Clock that neve Ran
Переглядів 3664 місяці тому
1986 8 Day Oompha Cuckoo Clock that neve Ran
Oompha Band with Dancers
Переглядів 4574 місяці тому
Oompha Band with Dancers
Vintage Sears Roebuck Co Rail Road Cuckoo Clock
Переглядів 7384 місяці тому
Vintage Sears Roebuck Co Rail Road Cuckoo Clock
8 Day Black Forest Movement Cuckoo Clock
Переглядів 5984 місяці тому
8 Day Black Forest Movement Cuckoo Clock
1965 KUNDO Anniversary Clock Made with Clipchamp
Переглядів 4845 місяців тому
1965 KUNDO Anniversary Clock Made with Clipchamp
My Gravity or Sawtooth Clock Anno 1750 Made with Clipchamp
Переглядів 5595 місяців тому
My Gravity or Sawtooth Clock Anno 1750 Made with Clipchamp
Part 2 1984 Regula ALVRT SCHWAB KARLSRUHE Movement Repair
Переглядів 4495 місяців тому
Part 2 1984 Regula ALVRT SCHWAB KARLSRUHE Movement Repair
Part 1-1984 Regula ALVRT SCHWAB KARLSRUHE Movement Repair
Переглядів 7235 місяців тому
Part 1-1984 Regula ALVRT SCHWAB KARLSRUHE Movement Repair
No. 2 - 1940 Colored LUX CUCKOO CLOCK
Переглядів 5626 місяців тому
No. 2 - 1940 Colored LUX CUCKOO CLOCK
1940 LUX Cuckoo Clock Repair
Переглядів 6816 місяців тому
1940 LUX Cuckoo Clock Repair
Citizen Battery Cuckoo Clock
Переглядів 7796 місяців тому
Citizen Battery Cuckoo Clock

КОМЕНТАРІ

  • @Cobesclocks
    @Cobesclocks День тому

    If your worried about file marks and people calling you a butcher what I would do is measure how tall the plate is take the bushing and put it in a vice and file it there and continue to measure until the numbers match up

  • @storiesfromruth
    @storiesfromruth День тому

    Hello, I've been trying to reach you by email, and there is no answer. I emailed you August 7, 9, and 20. Maybe your email is not working, so I thought I would try this. You are fixing my cuckoo clock, and I want to discuss it. Thanks. Alana Koepl.

  • @handicappedtraveler
    @handicappedtraveler 2 дні тому

    You sure di find great cli=ox=cks thanks for sharing this one full support our friend

  • @bernardpoole9123
    @bernardpoole9123 2 дні тому

    I’m guessing that it is nickel plated

  • @mishalea
    @mishalea 2 дні тому

    You sure do sound chipper, big bro; 😁 I like the shiny brass, close to gold! 😉 I like the bell sound as well, kinda like a church bell. Good refresh of that old clock! God bless ya and have a great week! ❤

    • @justmike57
      @justmike57 2 дні тому

      I was two months ahead on my videos. I haven't worked on clock for over a month with all that has been going on. I think all is back to normal now. Thank you for your kind words and the thought of the bell and memories. You have a great week and God Bless.

  • @kovec69
    @kovec69 2 дні тому

    I have a movement that has a bent, I believe it's called a minute hand arbor or center wheel. Can it be taken off and replaced?

    • @justmike57
      @justmike57 2 дні тому

      Yes it can, but I have found a few clocks that had the bent minute had arbor, I straighten it and mess the clock up and had to re-bend it to get the clock running again.

    • @kovec69
      @kovec69 17 годин тому

      @@justmike57 Thanks, I'm having trouble getting the gear off the arbor, and hints?

    • @justmike57
      @justmike57 17 годин тому

      @@kovec69 I do believe the gear is wedged on there like the hour hand of the clock. You can try two screw drivers on either side and pry up evenly as you can. Also try some oil on the shaft before you start.

  • @JohnAmes
    @JohnAmes 2 дні тому

    well done my friend

    • @justmike57
      @justmike57 2 дні тому

      Thanks for the visit John.

  • @munnerlyn3
    @munnerlyn3 2 дні тому

    Good experiment with the Mothers and the Semichrome. Yes for the price the mothers is the way to go as it looks like it does the same job. Great job on cleaning the clock up. Love the sound. I dont have a curfew clock yet. LOL. Keep up the great work. Thanks for the shout out. God bless you and yours.

    • @justmike57
      @justmike57 2 дні тому

      I love the look of these clocks. The part that holds the bell, I am sure others paint them. Maybe use a chrome gold spray paint might look good. Thanks so much for stopping in Mark. God Bless.

  • @Iseekoutthetruth
    @Iseekoutthetruth 3 дні тому

    Turned Out Nice And Shinny.

    • @justmike57
      @justmike57 2 дні тому

      Yes, it did, Bat. thanks so much for watching and see you next week. Have a great Week.

  • @jordanbusby6231
    @jordanbusby6231 3 дні тому

    Good morning and beautiful clock and you'll definitely know what time it is

    • @justmike57
      @justmike57 2 дні тому

      Compared to a Cuckoo Clock, you are right about KNOWING what time it is. Thanks so much for watching Jordan.

  • @HabibPharmacy
    @HabibPharmacy 3 дні тому

    😊❤❤😊❤😊 beautiful 😍❤️😊 good 😊😊❤ information 😌😊

  • @claybaby003
    @claybaby003 3 дні тому

    Whoa Mike!! You had me nervous with that white pen lol the bell turned out amazing!! Interesting clock I've never seen before would like to hear it after the leather strip goes on it was pretty loud lol Great job Mike!!

    • @justmike57
      @justmike57 2 дні тому

      I just ordered the leather today for the hammer. I will have to pop it in a video or just make a new video on changing the leather. Thanks so much for watching claybaby003

  • @badbadbob1
    @badbadbob1 3 дні тому

    History of a Curfew bell is very interesting. It had to do with everything from stopping crime to saving fuel for lanterns. That did come out better then new I thank.

    • @munnerlyn3
      @munnerlyn3 2 дні тому

      I would like to know more of the history of this clock. Where can I find that information? Quick google search said it had to do with a date and knowing what time that they had to bring their daughter home which doesnt sound right.

    • @badbadbob1
      @badbadbob1 2 дні тому

      @@munnerlyn3 I found several references from turning off all light sources, to time to go home. Many were for how we lived back then. Remember the gas light was king and DC power was the light bulb power. if you even had power. Automobiles were just getting started as a way to get about. But horses provided 80% of human travel, Followed by Trains then ocean liners. I searched 1909 history.

    • @justmike57
      @justmike57 2 дні тому

      This makes sense for that period in time. If not, it does make a good story. Thanks for watching Bob Anderson.

  • @cheryladair732
    @cheryladair732 3 дні тому

    Came out nice. I hadn't seen a curfew version. Thanks for sharing!

    • @justmike57
      @justmike57 2 дні тому

      I didn't know there were other versions of the clock. I do know that I really like the looks of this one Chery. Thanks so much for your comment and visit. You have a great week and God Bless.

  • @TheNDTShow
    @TheNDTShow 3 дні тому

    Nice repair work mike not much wrong with it very clean take care

    • @justmike57
      @justmike57 2 дні тому

      The shine was my main thing about this clock and it turned out great. Thanks so much for watching The N.D.T. Show

  • @auirora1
    @auirora1 3 дні тому

    Hi Mike, I have this clock but I am having trouble with the cuckoo and door closing after it successfully cuckoos. I am able to close the door manually with the cuckoo going back in. Is it possible that the cuckoo and its associated black bar is disengaged with the movement? Any help would be appreciated.

    • @justmike57
      @justmike57 2 дні тому

      Your clock could be in need of oiling. The book says to oil your clock every 5 to 7 years to blow out the dust, and freshen up the old oil so it doesn't start to gum up and stop the clock. If you take the movement out to oil it, check the spring tension for the bird to see if you need to take another wrap around the bar of the bird so he will come back inside the house.

    • @auirora1
      @auirora1 2 дні тому

      Thanks Mike.

  • @handicappedtraveler
    @handicappedtraveler 3 дні тому

    Thans a good looking clock glad you managed to figure out the light situation

    • @justmike57
      @justmike57 2 дні тому

      I knew they had long strings of LED, but I was not sure is I could get a Short strip to work. All worked out well. Thanks for stopping in Handicapped traveler and you two have a Blessed Week.

  • @robertknox9330
    @robertknox9330 3 дні тому

    Get rid of the music!

    • @justmike57
      @justmike57 2 дні тому

      The music was a rookie mistake. It is amazing how well the camera picks it up.

  • @cheryladair732
    @cheryladair732 4 дні тому

    Very creative thinking to relight this clock!

    • @justmike57
      @justmike57 2 дні тому

      Thank you Chery and thanks for watching. God Bless.

  • @LosCardenitas
    @LosCardenitas 4 дні тому

    The video was for an issue not pertaining to mine. However, it helps determine why, and now the clock works fine. My clock was moved and not level, the reason it was stopping after a minute. It looked fine, but when I used a level, it was fixed. There is no need to open it and mess with the inside.

    • @justmike57
      @justmike57 2 дні тому

      I am glad this video helped you in a different way and your clock is running fine now. Thanks so much for watching and you have a great week.

  • @claybaby003
    @claybaby003 5 днів тому

    Lol Mike you forgot my pendulum lol I've sent a couple of emails to you about it but you never answer lol..I just didn't send the weights but I sent the pendulum would really like to put it back to grandma's clock..thanks

    • @justmike57
      @justmike57 2 дні тому

      I haven't checked my emails in a while. I was sure I sent the pendulum. I will check around and see if I can find it or just send you another one that goes with the clock.

    • @claybaby003
      @claybaby003 2 дні тому

      @justmike57 I made sure to check everywhere in the box you sent me but my pendulum wasn't there. I emailed you right away asking about it. I would really like the pendulum that went with grandma's clock I can always buy another one but I want the one that goes with the clock it was grandma's lol

  • @CarryonJeffnJohn
    @CarryonJeffnJohn 6 днів тому

    Another clock back from the dead by the genius Mike awesome job buddy 👍

    • @justmike57
      @justmike57 2 дні тому

      Thank you John. You have a great week ahead.

  • @HYTELES
    @HYTELES 8 днів тому

    I bought this one. I live in Michigan and they told me to dig four foot deep. I am still confused about how to set this properly, so it's just sitting in my garage for weeks.

    • @justmike57
      @justmike57 7 днів тому

      Where I live, there isn't really a frost line to worry about. Michigan freezes DEEP. and you have to get below the frost line to your pole does not heave out of the ground as the ground starts to thaw out.

  • @SCWONGAWAM
    @SCWONGAWAM 8 днів тому

    Like18❤❤❤❤ great video friend ,,,salam sukses 🕳️👍

    • @justmike57
      @justmike57 7 днів тому

      Thanks so much for watching SC WONG AWAM. You have a great day.

  • @TheNDTShow
    @TheNDTShow 9 днів тому

    Cool upgrade work here on this trasfermation to led

    • @justmike57
      @justmike57 7 днів тому

      Thank you so much. It was a bit upsetting to find out they stopped making the bulb for this clock. L.E.D. was the only way to go.

  • @Texas_Made_
    @Texas_Made_ 9 днів тому

    Mikeeeeeeeeee😫😫😫😫😫😫🙆🏾‍♀️. Hope your doing well. Getting my big boy ready to head back to school😢. This clock is so cool😮,i definitely like unique stuff like this for my place! Another reason i stay in thrift stores is because i enjoy having stuff a lot of people can't just go get in bulk❤. See you next upload🎉

    • @justmike57
      @justmike57 7 днів тому

      Thanks so much for your support Texas_Made_1988. Most these clocks, people just got tired of them and their parents of grandparents had one of these clock. I leave the noise turned off on the clock but do enjoy the waterfall.

  • @JohnAmes
    @JohnAmes 9 днів тому

    well done my friend

    • @justmike57
      @justmike57 7 днів тому

      Thanks so much for stopping in John.

  • @badbadbob1
    @badbadbob1 9 днів тому

    lol You should make the motor go backward so the water flows up .

    • @justmike57
      @justmike57 7 днів тому

      That would be different for sure Badbadbob.

  • @mishalea
    @mishalea 9 днів тому

    That is a super nifty clock. I love the fall, mountain scenery with the waterfall and sound. Good job, Mikey poo. Have a great day and God bless ya, bro. 😊

    • @justmike57
      @justmike57 7 днів тому

      I am happy you like this clock. Our Grandma use to have one almost like this one Sis. God Bless and have a wonderful week.

    • @mishalea
      @mishalea 7 днів тому

      @@justmike57 how sweet! 🥰

  • @jordanbusby6231
    @jordanbusby6231 10 днів тому

    Good morning mr Mike beautiful clock

    • @justmike57
      @justmike57 7 днів тому

      A very Good Morning to you Jordan Busby.

    • @jordanbusby6231
      @jordanbusby6231 7 днів тому

      @@justmike57 how are you Mr mike

  • @Iseekoutthetruth
    @Iseekoutthetruth 10 днів тому

    Nice Upgrade, You Are The Clock Whisper.

    • @justmike57
      @justmike57 7 днів тому

      Thank you very much Bat and thank you, for watching.

  • @claybaby003
    @claybaby003 10 днів тому

    Good job Mike! I see grandma's clock behind your head lol glad to have it home but still waiting for you to send my pendulum lol

    • @justmike57
      @justmike57 7 днів тому

      Oh my gosh! Did I forget the Pendulum? I will have to look for it and get it mailed off.

  • @sherrisurles1155
    @sherrisurles1155 10 днів тому

    Looks great Mike, those lights were a good idea to bring that clock back to life.

    • @justmike57
      @justmike57 7 днів тому

      It was almost my only option. I am glad it worked out for the clock. Thanks so much for watching.

  • @HabibPharmacy
    @HabibPharmacy 10 днів тому

    Good information very nice 🙂😊🎉❤ excellent 👌👍

  • @HabibPharmacy
    @HabibPharmacy 10 днів тому

    😊🎉❤❤❤❤❤❤❤hi dear how are you 🙂😊 good sharing 💖😊

    • @justmike57
      @justmike57 7 днів тому

      Thank you for watching and have a great day.

  • @munnerlyn3
    @munnerlyn3 10 днів тому

    You did a great job bringing this clock back from the grave. Great job. I like it. The LED strips did well. Thanks for the shout out. God bless you and yours.

    • @justmike57
      @justmike57 7 днів тому

      I was a bit afraid the L.E.D. lights would be too bright, but they worked out well. Thanks for watching Mark and God Bless.

  • @willtherocker2373
    @willtherocker2373 10 днів тому

    Hit the 👍👍for Mike

  • @willtherocker2373
    @willtherocker2373 10 днів тому

    Mike good morning that is the coolest clock. Your brother did wonderful. It might be made in Japan not for sure Hopefully you get the light to work. Have a wonderful blessed day.

    • @justmike57
      @justmike57 7 днів тому

      A very Good Morning too you Will. If you skipped to the end, you can see the lights working on the clock Will.

  • @MarlaenaMann
    @MarlaenaMann 11 днів тому

    I have a clock just like this! The casing is in beautiful shape but the clock isn’t working. Maybe I’ll try oiling the movement when I can find the time 😊 thank you!!

    • @justmike57
      @justmike57 7 днів тому

      Check to see if your bellows are broken, otherwise this old of a clock needs the oil every 5 years.

  • @landrew56
    @landrew56 11 днів тому

    very helpful as to the belts. thank You !

    • @justmike57
      @justmike57 7 днів тому

      The belt is the most difficult to figure out and that is why I made sure to show the route for the belt. Thanks for watching.

  • @welcometokrataikitchen
    @welcometokrataikitchen 13 днів тому

    Hi good evening and so nice video thanks for sharing cheers have a good holiday weekend to you too 👍😅🍷

    • @justmike57
      @justmike57 7 днів тому

      Cheers to you as well Kratai. You have a warm, dry day this week and thanks for watching.

  • @Drifter5.7
    @Drifter5.7 14 днів тому

    I guess you can do a Big Ben soon yeh?

    • @justmike57
      @justmike57 7 днів тому

      I think so. I have a few old ones I need to get out of the Conex and see what they are all about as well. Thanks for stopping in DJ.

  • @ElderPinto254
    @ElderPinto254 14 днів тому

    i ask a other guy named mike for help send him pictures but nothing do you know somebody ho i can turn to for help.. thanks

    • @justmike57
      @justmike57 7 днів тому

      At the end of the Video, I show Marks channel, his channel is full of information on clocks. Might not be the best videos, but he does his best.

  • @cheryladair732
    @cheryladair732 14 днів тому

    Very interesting clock design. The face is interesting to look at . Nice to see it working again. Great video!

    • @justmike57
      @justmike57 7 днів тому

      Thanks Chery. I was hoping the outside of the clock was in better shape as well. Thanks so much for watching. God Bless.

  • @munnerlyn3
    @munnerlyn3 16 днів тому

    As always Mike you did a terrific job in repairing this clock and making it look presentable. Keep the videos coming. May God bless you and yours. Thanks for the shout out.

    • @justmike57
      @justmike57 7 днів тому

      Thank you so much Mark. I know God is watching over you.

  • @JohnAmes
    @JohnAmes 16 днів тому

    well done my friend

  • @Iseekoutthetruth
    @Iseekoutthetruth 17 днів тому

    That Clock Looked Really Old, I Seen 1 Just Like That At A Yard Sale For $3, But I Do Not Use Alarm Clocks.

    • @justmike57
      @justmike57 7 днів тому

      I have my phone set to go off in the morning just in case I am able to sleep past the time I take dad to breakfast. Thanks for watching Bat and have a great weekend.

  • @TheNDTShow
    @TheNDTShow 17 днів тому

    Nice fix here

  • @badbadbob1
    @badbadbob1 17 днів тому

    You wonder how many years the alarm clock woke up some one to go milk the cows or go to their factory job.

    • @justmike57
      @justmike57 7 днів тому

      And that is why I almost wish clocks could talk of the history they have gone through. Thanks for watching Bob.

  • @willtherocker2373
    @willtherocker2373 17 днів тому

    Hit the 👍👍For Mike